SPM26-12 Adjustable Pole Mount Solar Rack Kit For 8, 10, or 12 Panels - Poles Included

SPM26-12 Adjustable Pole Mount Solar Rack Kit For 8, 10, or 12 Panels - Poles Included SKU: SPM26-12

The SPM26-12 Adjustable Pole Mount Solar Rack Kit provides a durable ground-mounted option for cabins, off-grid homes and remote sites.

The system uses a steel pole-mounted structure with Pegasus Solar aluminum rails and Multi-Clamps. The adjustable strut allows the array angle to be manually changed for seasonal optimization. 

Bedrock plate is not included. To include, please see link here.

FEATURES

• Available for 8, 10 or 12 panels
• Panels install in landscape orientation, 2 modules wide
• Pegasus Solar aluminum rails and structural splices
• Multi-Clamps compatible with 30 to 40 mm panel frames
• Adjustable tilt using the telescopic support strut
• Steel pole and structural support system
• Designed for installation in a poured concrete footing
  

STRUCTURE AND MATERIALS

• Steel pole-mounted support structure
• Steel structural rails
• Pegasus aluminum panel rails
• Pegasus Multi-Clamps and rail hardware
• Adjustable diagonal brace and telescopic support strut
  

FOUNDATION AND INSTALLATION REQUIREMENTS

• Concrete: 25 MPa or 30 MPa
• Sonotube-style foundation form
• Compacted base over undisturbed soil
• Pole should be checked for plumb in two directions
• Brace the pole in place while the concrete sets
• Allow at least 24 hours before continuing installation 
  

PANEL CONFIGURATIONS

• 8 panels: 2 × 4 landscape
• 10 panels: 2 × 5 landscape
• 12 panels: 2 × 6 landscape

The 12-panel configuration is designed around modules approximately 77.2” × 44.65”. Confirm panel dimensions and clamping requirements before installation. 

INCLUDES

• Adjustable pole mount structure
• Steel pole and support components
• Pegasus Solar rails
• Rail splices
• Multi-Clamps
  

WARRANTY

• Racking and structure: 10-year limited warranty on rack and pole components

NOTES

• Solar panels not included
• Multi-Clamps are designed for compatible 30 to 40 mm panel frames
• Foundation sizing should follow local soil and building requirements
• Installation should follow the supplied installation instructions and applicable local codes
  
• Bedrock mounting plate not included in the stand-alone kit

Specs

Model: PM-81012

Depth Adjustments: Increase hole depth by about 6 in for every 12 in of pole height beyond table values used in your design

Embed Depth: Approximately 72 in of pole below grade in concrete

Panel Capacity: Configurable for 8, 10 or 12 solar modules Clamps and hardware: Pegasus Multi Clamps and required mounting hardware

Weight: 700 lb

Mount Type: Adjustable pole mount

Panel Capacity: 8, 10 or 12 panels

Panel Orientation: Landscape

Array Layout: 2 panels wide

8-Panel Configuration: 2 × 4

10-Panel Configuration: 2 × 5

12-Panel Configuration: 2 × 6

Approx. Array Height, 8 Panels: 15’1”

Approx. Array Height, 10 Panels: 18’10”

Approx. Array Height, 12 Panels: 22’7”  

Compatible Panel Frame Thickness: 30 to 40 mm

Rail System: Pegasus Solar aluminum rails

Structural Rail Splices: Pegasus bonded structural splices

Main Structure: Steel

Mounting Structure: Single-column pole support

Tilt Adjustment: Manual telescopic strut adjustment

Foundation Type: Concrete footing

Recommended Concrete Strength: 25 MPa or 30 MPa

Foundation Form: Sonotube

Minimum Initial Concrete Set Time: 24 hours  

Reference Module Size: Approx. 77.2” × 44.65”

Reference 12-Panel Layout: 2 wide × 6 high  

Clamp Type: Pegasus Multi-Clamp

MLPE Mounting: Pegasus MLPE mounts

Bonding: BondBox and north-south bonding jumper

Structural Fasteners: M8 through M18 hot-dip galvanized bolts

Warranty: 10-year limited warranty on rack and pole components

Installation Manual