my-PV 20-0151 Temperature sensor for AC-THOR

The my-PV temperature sensor 20-0151 This digital sensor measures temperatures for AC•THOR and AC•THOR 9s. It features a five-meter cable and a six-millimeter diameter sleeve. Up to four sensors can be used in a compatible system. The included accessories provide temperature information for the selected control task; power controllers, heat generators, and the required immersion sleeve must be purchased separately.

Delivery

1× my-PV digital temperature sensor 20-0151 with 5 m cable

Produktvorteile

-- Digital measurement information. The sensor provides the compatible my-PV power controller with the temperature at the designated measuring point.

-- Planned installation. A cable length of five meters and a sleeve diameter of six millimeters allow for alignment with the cable path and a suitable immersion sleeve.

-- Multiple measuring points. Up to four digital sensors can be connected and assigned their function in the respective operating mode.

Compatibility

For my-PV AC•THOR and AC•THOR 9s. The sensors operate via a bus system with three wires each; the manufacturer's instructions describe how to connect multiple sensors. Sensors must be assigned and activated in the device. A suitable immersion sleeve must be used for measuring points in the heat storage tank; the sensor must not be immersed directly in water. This sensor neither supplies nor replaces the power controller, heating element, or safety temperature limiter.

Technical information

-- Manufacturer's part number: 20-0151
-- Sensor type: Digital temperature sensor
-- Cable length: 5 m
-- Sleeve diameter: 6 mm
-- Number of conductors on the sensor: 3 wires
-- System connection: Bus system
-- Compatible power controllers: my-PV AC•THOR and AC•THOR 9s
-- Maximum number of sensors: Up to 4 on a compatible system; assignment depends on operating mode
-- Installation in the heat storage tank: Use immersion sleeve; do not immerse directly in water
-- Sensor identification: Serial number on the sensor cable for assignment in the device

Matching accessories and related products

A compatible my-PV AC•THOR or AC•THOR 9s is required for operation. The necessary heat generator and a suitable immersion sleeve for the measuring point must be planned separately. Other energy meters or temperature sensors are not approved replacements for this accessory simply because they have a similar product name.

Why Mini Power

Mini Power describes the my-PV temperature sensor 20-0151 The sensor is a standalone accessory and its function is separate from the power electronics of the AC•THOR system. Cable length, sleeve diameter, and connection requirements help you plan the measuring point effectively before ordering. Information on sensor assignment and protection by a thermowell is available in the my-PV documentation. Compare your existing device, operating mode, and installation situation with your specialist. This will ensure that the scope of delivery and requirements for a replacement or expansion order remain transparent.

Frequently asked questions

Does this offer include a heating element or AC•THOR?

No. The offer includes only the individual temperature sensor with cable. Power controller, heat generator, and immersion sleeve are not included in the stated scope of delivery.

Does the sensor itself display the temperature?

The measured values ​​are displayed in the connected and appropriately configured AC•THOR system. The sensor is not a standalone display unit.