Monitoring Screen for Smart Lithium Battery Series

KEY FEATURES 【Accurate Monitoring】 Obtains battery bank operation information directly from the battery management system (BMS) for precise tracking and prediction. Takes all the guesswork out of the battery bank. 【Plug and Play】 Simply connect the monitoring screen to the battery bank using the included RJ45 communication cable for real-time monitoring, without the need for a shunt. 【Comprehensive Protection】 Displays 9 straightforward warning codes for quick recognition of potentially abnormal conditions and improper operation, helping extend the lifetime of the battery bank. 【Battery Shelf Mode】 Supports switching the battery/battery bank to shelf mode to preserve power when it is not in use. 【Easy Operation】 Shows detailed battery bank information at the push of a page up/page down button without the need for system configuration or calibration.  

This Monitoring Screen, a high-precision meter, is the perfect companion to Renogy Smart Lithium Iron Phosphate Battery Series. Instead of measuring the current flowing in/out of the battery bank using a shunt, it can communicate directly with the battery management system (BMS) and obtain more accurate state of charge (SoC) readings compared to traditional battery monitors. Other readings including voltage, current, capacity, remaining time, warning codes, and the number of paralleled batteries are also available to help users avoid abnormal conditions and extend the lifetime of the battery bank.

If you have any questions regarding this product, please call us at 1 (909) 287-7111 or contact us.

Easy to Use

Monitor your battery bank information in real-time.

After connecting the monitoring screen to the battery or the battery bank, tap and hold the Power Button for 1 second to switch the battery or the battery bank to active mode.

Simply push the Page Up or Page Down Button to check out the readings, no system configuration or calibration needed.

Accurate Monitoring

Obtains battery bank operation information directly from the battery management system (BMS) for precise tracking and prediction.

Parallel Battery Bank

Monitors the charging/discharging process of the parallel battery bank with inter-battery communication enabled.

How to connect:

1. Connect the RS485 LINK Communication Ports of the former batteries to the RS485 UP Communication Ports of the latter ones using CAT5 (or above) Ethernet straight-through cables (not included).

2. Use the included RJ45 communication cable to connect the monitoring screen to the RS485 UP Communication Port on the first battery.

Battery Shelf Mode

Supports switching the battery/battery bank to shelf mode to preserve power when it is not in use.

How to use: Push and hold the Power Button for 3 seconds.

Perfect for Renogy Smart Lithium Battery Series

This monitoring screen is exclusively designed for Renogy Smart Lithium Iron Phosphate Batteries used in off-grid energy storage systems.

Compatible with Renogy 48V 50Ah Smart Lithium Battery, 12V 100Ah Smart Lithium Battery w/ Self-Heating Function, and 12V 100Ah Smart Lithium Battery.

Quick and Easy Mounting

This is a wall-mounted monitoring screen.

How to install:

1. Remove the snap-fit front cover plate.

2. Use the monitoring screen as a template to mark the screw holes. Pre-drill four screw holes on the mounting surface with a drill.

3. Affix the monitoring screen to the mounting surface with the included four self-tapping screws.

4. Re-attach the snap-fit front cover plate to the monitoring screen.

NOTE

• The monitoring screen is fully compatible with the Renogy Smart Lithium Iron Phosphate Batteries purchased on renogy.com after April 15th 2020. If the battery bank connected to the monitoring screen contains one or more Smart Lithium Iron Phosphate Batteries purchased on renogy.com before April 15th 2020, there is a small chance of compatibility issues. In such cases, please contact us for help.
• If you have any questions regarding this product, please call us at 1 (909) 287-7111 or submit a ticket for troubleshooting assistance.
• More questions about your off-grid power system? Learn more from Renogy Learning Center!

RV MARINE
CAMPING
OUTDOOR
CABIN
TRUCK  

Package Includes

Monitoring Screen for Smart Lithium Battery Series 1 x

 

Electrical Specifications	Mechanical Specifications
Supply Voltage: 12VDC	Communication Port: RJ45 (RS485 Protocol)
Supply Current: 30mA	Display: Backlit LCD
Power Consumption: <1W	User Interface: 2 Front Panel Menu Buttons, 1 Power Button
Operating Temperature Range: -4°F~113°F / -20°C~45°C	Mounting System: Wall Mount
Voltage Accuracy: ±0.1V	Dimension: 2.76 x 4.33 x 1.25 inch / 70 x 110 x 31.8 mm
Current Accuracy: ±0.1A	Weight: 0.14 lbs / 62 g
Accessories
RJ45 Communication Cable: 5m/16.4ft	Self-tapping Screws: M2.9 x13
Certification: CE ROHS FCC EMC	Material and workmanship warranty: 1 Year

    1. Is this monitor compatible with non-Renogy brand lithium iron phosphate batteries?   No, it is only for the Renogy Smart Lithium Battery Series which includes our 48V 50Ah Smart Lithium Battery, 12V 100Ah Smart Lithium Battery w/ Self-Heating Function, and 12V 100Ah Smart Lithium Battery. If you need a monitor screen for connecting non-Renogy brand batteries, we recommend using our 500A Battery Monitor With Shunt. 2. Will the display always be on? Can I turn it off?   The display will automatically turn off when no operation is performed within 15 - 25 seconds. 3. How do I know that the lithium battery is 100% fully charged?   The battery level shows the real-time charge level of the battery relative to its capacity using four battery segments. If the battery is being charged, the battery segments will illuminate one by one repeatedly until the battery is fully charged. If the screen is used with a parallel battery bank, the battery level will be the average charge level of the batteries in the battery bank. More questions about your off-grid power system? Learn more from Renogy Learning Center!