KSENG tile roof mounting system for PV modules

The KSENG tile roof mounting system for PV modules This is a PV mounting kit for tiled roofs, including rails, roof hooks, and clamps. Made of AL6005-T5 aluminum and SUS304 stainless steel, it offers high corrosion resistance and long-term stability. Adjustable components reliably and permanently compensate for varying roof and module conditions, facilitating the professional installation of framed modules with a frame height of 30 to 38 mm.

Delivery

1× KSENG tile roof mounting system for PV modules

Produktvorteile

-- Stainless steel roof hooks: They support a secure attachment to suitable tiled roofs.

-- Quick click assembly: The clamping system facilitates the orderly mounting of the solar modules.

-- Flexible height adjustment: Adjustable components help to compensate for roof and module conditions.

-- Aluminum and stainless steel: AL6005-T5 and SUS304 combine stability with corrosion resistance.

-- For framed PV modules: Designed for frame heights of 30 to 38 mm and module widths up to 1.134 mm.

Compatibility

Suitable for framed PV modules with a frame height of 30 to 38 mm and a module width of up to 1.134 mm on suitable tiled roofs. Roof tiles, rafters, roof hook position, rail spacing, and wind and snow loads must be checked on a project-specific basis. Proper installation must not place undue stress on or damage the roof membrane.

Technical information

-- Material: Aluminum AL6005-T5 / Stainless steel SUS304
-- Mounting type: Rail and roof hook system
-- Module frame height: 30–38 mm
-- Module width: up to 1.134 mm
-- Application: suitable tile roofs

Matching accessories and related products

• KSENG flat roof ballast mounting system 20° for PV modules as an alternative for suitable flat roofs.

Why Mini Power

At a PV mounting kit for tiled roofs Roof tiles, rafters, module frames, and local loads must be compatible. Mini Power therefore specifies the confirmed material and module limits of the KSENG tile roof mounting system This is clearly presented. Frame height, module width, and roof structure can be compared before ordering. For flat roofs, a suitable alternative is directly linked, without equating different mounting methods. This ensures that the selection and subsequent installation remain tailored to the actual roof construction.

Frequently asked questions

-- Which module frames are planned?

The system supports framed PV modules with a frame height of 30 to 38 mm and a module width of up to 1.134 mm.

-- Does the system fit any tiled roof?

No. Roof tiles, rafter position, roof hook position and static loads must be suitable for the specific roof construction.

-- What needs to be checked before installation?

The condition of the roof, fixing points, rail spacing and local wind and snow loads must be professionally assessed.