KSENG Balcony Power Plant Mounting Kit 0°–30° for PV Modules

The KSENG Balcony Power Plant Mounting Kit 0°–30° This system attaches a framed PV module to suitable balconies with round handrails up to 50 mm in diameter. Two railing hooks, two mounting rails, and adjustable telescopic supports allow for vertical mounting (0°) or an inclination of 10° to 30°. Aluminum and stainless steel components ensure a stable, corrosion-resistant, and easily traceable mounting system for the specific installation situation, provided it is professionally designed.

Delivery

2× J-hooks, 209 × 54 × 38 × 2,0 mm
2× Hex bolt set M6 × 75
2× Hex bolt set M6 × 20
2× EPDM seal, 38 × 2 mm
2× adjustable angle clamp, 310 mm, 15°–30°
6× Hex socket screws M8 × 20
4× Hammerhead screw set M8 × 25
2× Hex bolt set M8 × 25
2× Hex socket screws M8 × 60
2× rail, 300 × 40 × 40 mm
4× clamp, 80 × 28 × 5,0 mm
8× Hammerhead screw set M8 × 45
2× End clamp, 30 mm
2× Hex socket screws M8 × 18
2× Hammerhead screw set M8 × 25 for microinverter mounting
1× rail, 300 × 40 × 40 mm, for microinverter mounting
2× terminals, 80 × 28 × 5,0 mm, for microinverter mounting
4× Hex bolt set M8 × 45 for microinverter mounting

Produktvorteile

-- Adjustable from 0° or 10°–30°: The module tilt can be adjusted to the intended installation situation.

-- For suitable mesh balconies: The hook construction supports the secure fastening of framed PV modules.

-- Aluminum and stainless steel: AL6005-T5 and SUS304 combine stability with corrosion resistance.

-- Pre-assembled components: They reduce assembly effort and facilitate alignment.

-- Telescopic support: Supports the adjustment of the intended tilt angle.

Compatibility

Designed for framed, landscape-oriented PV modules and suitable balconies with round handrails up to 50 mm in diameter and vertical struts. Before installation, the railing shape, load-bearing capacity, module dimensions, frame height, wind and snow loads, and local regulations must be checked. This documentation does not authorize wall mounting or use on unsuitable railings.

Technical information

-- Tilt angle: 0° or 10°–30°
-- Handrail: round, up to 50 mm in diameter, with vertical struts
-- Material: Aluminum AL6005-T5 / Stainless steel SUS304
-- Application: suitable mesh balconies
-- Module type: framed PV modules in landscape format
-- Rail dimensions: 300 × 40 × 40 mm
-- Assembly personnel: at least two people

Matching accessories and related products

• KSENG flat roof ballast mounting system 20° for PV modules as an alternative fastening solution for suitable flat roofs.
• KSENG tile roof mounting system for PV modules as an alternative fastening solution for suitable tiled roofs.
• Photovoltaic balcony power plant bracket attachment as an alternative vertical balcony railing bracket.

Why Mini Power

At a adjustable balcony power plant bracket Railing shape, module dimensions, and local loads are crucial. Mini Power therefore specifies the inclination range, material, and application limits of the KSENG Mounting Sets The linked mounting systems make it easy to compare with alternative solutions for balconies, flat roofs, or tiled roofs. Before ordering, the fixing point, load-bearing capacity, and permissible module size should be checked based on the specific installation situation. This reduces incorrect purchases and facilitates reliable planning before installation.

Frequently asked questions

-- What inclinations are possible?

The mounting kit supports a flat 0° mounting or an adjustable tilt from 10° to 30°.

-- Will the set fit any balcony railing?

No. The railing shape, dimensions, and load-bearing capacity must match the confirmed operating limits of the set.

-- What needs to be checked before installation?

Module dimensions, frame height, fixing points and local wind and snow loads must be professionally assessed.