Fronius Smart Meter TS 65A-3 – three-phase energy meter up to 65 A

The Fronius Smart Meter TS 65A-3 This is a bidirectional, three-phase energy meter for direct connection up to 65 A. It records consumption and feed-in and transmits measured values ​​to the Fronius system via Modbus RTU. This supports the visualization of consumption, self-consumption optimization, and the controlled use of solar power in a properly configured photovoltaic system.

Delivery

1× Fronius Smart Meter TS 65A-3 (42,0411,0345)
2× Protective covers
2× sealing wires
2× connection covers
1× Quick Start Guide

Produktvorteile

-- Record consumption and feed-in
Bidirectional measurement provides the basis for transparent energy management.

-- Direct connection up to 65 A
Current measurement is performed without additional external current transformers.

-- Modbus RTU communication
The RS485 connection transmits measurement data to the supported Fronius system.

-- Compact DIN rail mounting
The housing requires three modules on a 35 mm DIN rail.

Compatibility

For Fronius GEN24 and supported Fronius systems with Datamanager 2.0. The minimum Datamanager version, as per the instructions, is 3.16.1. The TS 65A-3 is a direct measuring device; CT current transformers for Smart Meter IP are not part of its measuring circuit. Installation in the distribution board must be carried out by a qualified electrician.

Technical information

-- Measurement type: Bidirectional direct measurement
-- Phases: 3
-- Maximum current: 65 A
-- Rated current: 5 A
-- Nominal voltage: 208–400 V
-- Nominal frequency: 50–60 Hz
-- Interface: RS485, Modbus RTU
-- Mounting: 35 mm DIN rail
-- Case width: 3 modular units
-- Protection class: IP51 housing / IP20 connections
-- Ambient temperature: −25 to +55 °C
-- Weight: 240 g

Matching accessories and related products

Fronius Smart Meter IP 5kA-3 42,0411,0347.

Other Fronius products for comparison:

-- Fronius Ohmpilot 9.0-3 – Consumption controller for PV hot water up to 9 kW

-- Fronius Symo GEN24 8.0 Plus SC – 8 kW hybrid inverter, 3-phase

-- Fronius Verto 25.0 Plus – 25 kW hybrid inverter, 3-phase

Why Mini Power

At the Fronius Smart Meter TS 65A-3 The measurement principle and system integration are crucial. Mini Power performs direct measurement up to 65 A and the connection via Modbus RTU This is therefore explicitly stated. This allows you to check before purchasing whether the measuring device is compatible with your distribution board and Fronius inverter. The exact manufacturer's part number and the clearly listed scope of delivery facilitate coordination with your installer, preventing confusion with current transformer accessories or other meter models.

Frequently asked questions

-- Do I need additional power converters?

No. The TS 65A-3 operates with direct measurement up to 65 A.

-- Can the meter measure consumption and feed-in?

Yes. It is bidirectional.

-- Is the Smart Meter IP the same device?

No. Smart Meter IP is a different model with different connection and communication equipment.